Pounds per US gallon to Grams per cubic centimeter Calculator

Direct answer

Multiply the entered pounds per us gallon value by 0.119826427316 to express it in grams per cubic centimeter (g/cm³). This converts pound per US gallon (lb/US gal) to gram per cubic centimeter (g/cm³) within the documented density family.

Variables and formula

• Pounds per US gallon (lb/US gal): the source value measured in pound per US gallon.
• Grams per cubic centimeter (g/cm³): the same quantity expressed in gram per cubic centimeter.
• Conversion factor: 0.119826427316 grams per cubic centimeter per pound per US gallon.

Grams per cubic centimeter = Pounds per US gallon × 0.119826427316

The generator emits numeric factors with at most 15 significant digits. Calculator results keep up to 10 significant digits for display; this formatting does not increase the precision of the measurement.

Unit definitions and named variants

Source unit: pound per US gallon (lb/US gal). This unit uses one avoirdupois pound per U.S. liquid gallon, where 1 U.S. gal = 231 in³ = 0.003785411784 m³ exactly. Named variant used: U.S. liquid gallon only; not the British Imperial gallon. Reference: National Institute of Standards and Technology: NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically; National Institute of Standards and Technology: NIST Handbook 44 (2026), Appendix C: General Tables of Units of Measurement.

Target unit: gram per cubic centimeter (g/cm³). Because 1 g = 10^-3 kg and 1 cm³ = 10^-6 m³, 1 g/cm³ = 1000 kg/m³ exactly. Named variant used: Mass density; cubic centimetre denominator. Reference: Bureau International des Poids et Mesures: The International System of Units (SI), 9th edition, version 4.01; National Institute of Standards and Technology: NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically.

The lb/US gal-to-g/cm³ direction remains inside the density quantity; it changes the unit label and numerical scale, not the kind of quantity being measured.

Relationship and precision

This route uses at least one deliberately preserved rounded factor. Treat the displayed factor as an approximation at the precision documented below.

• lb/US gal relationship: The preserved application factor is truncated relative to the exact-reference quotient 119.8264273168966… kg/m³; this discrepancy is documented rather than silently changing the generator factor.
• g/cm³ relationship: The factor follows exactly from SI decimal prefixes.

To audit the factor through the family base unit, divide the raw dataset factors 119.826427316 by 1000. The generator emits that quotient once at 15 significant digits as the canonical direct factor 0.119826427316; runtime calculations do not divide the already-emitted base factors again.

Reproducible example

For 10 pounds per us gallon, 10 × 0.119826427316 = 1.19826427316 grams per cubic centimeter. Repeating the same multiplication with the stated factor reproduces the displayed conversion before interface rounding.

Directional scale check

Because one pound per US gallon contains 0.119826427316 grams per cubic centimeter, the target number is smaller than the source number for every positive input. Zero maps to zero, while negative inputs are rejected because this family models non-negative magnitudes.

Interpretation

Read the result as grams per cubic centimeter, not pounds per us gallon. A value entered as lb/US gal leaves the calculator labelled g/cm³; this directional distinction matters even when the two units describe the same density quantity.

Assumptions and limitations

• Only non-negative mass-density magnitudes are accepted by this family.
• Pound per cubic foot uses the avoirdupois pound and international foot, not legacy survey-foot volume.
• Density can vary with temperature, pressure, composition, and measurement method; this converter performs unit scaling only.

Common mistakes

• An Imperial gallon is larger and produces a different density factor.
• The centimetre is cubed, so the prefix contributes 10^-6 to the volume.

Continue within the Density family

See the Density conversion hub for its five-unit reference table and all 20 directed routes.

• Reverse the direction: Grams per cubic centimeter to Pounds per US gallon
• Compare another density route: Pounds per US gallon to Kilograms per cubic meter
• Compare another density route: Pounds per US gallon to Kilograms per liter
• Compare another density route: Pounds per US gallon to Pounds per cubic foot
• Compare another density route: Grams per cubic centimeter to Kilograms per cubic meter

Assumptions

• The entered value uses pounds per us gallon exactly as labelled.
• Only non-negative mass-density magnitudes are accepted by this family.
• Rounding and measurement uncertainty remain the user's responsibility.

Sources and methodology

CalcMotive publishes the formula and assumptions so you can decide whether the estimate fits your use case. See our methodology standards.

• The International System of Units (SI), 9th edition, version 4.01; Bureau International des Poids et Mesures; accessed Aug 7, 2026
• NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically; National Institute of Standards and Technology; accessed Aug 7, 2026
• NIST Handbook 44 (2026), Appendix C: General Tables of Units of Measurement; National Institute of Standards and Technology; accessed Aug 7, 2026